Yes, you can absolutely combine frameless and semi-frameless glass fencing in the same project.
In fact, mixing the two systems is a highly strategic design approach used by designers and smart homeowners to balance premium aesthetics with practical structural requirements and budget constraints.
Because both systems use clear glass, they blend together beautifully from a distance. However, you must carefully plan the transition points to maintain structural integrity and pass your mandatory AS 1926.1 pool safety inspection.
💡 Top Scenarios for Combining Both Systems
- The “View vs. Boundary” Strategy (Maximising the View): Use fully frameless glass along the primary section of the fence facing your outdoor entertainment area, patio, or kitchen. This gives you a completely seamless, unobstructed “resort-style” view of the pool water. Then, transition to semi-frameless glass (or even black aluminium slats) along the side boundaries or back garden runs where a completely invisible barrier isn’t necessary.
- The Structural Substrate Challenge (Concrete vs. Timber Deck): If part of your pool fence runs across a solid concrete slab and the other part transitions onto a timber deck, mixing systems is incredibly practical. You can use frameless core-drilled spigots deep into the concrete. If the timber deck lacks the ideal sub-frame framing or under-deck structural blocking to handle the massive leverage weight of a 12mm frameless panel, you can switch to semi-frameless vertical posts on the deck. The full-height posts share and distribute the structural wind load evenly, making it much more forgiving on timber surfaces.
- The Sloping Ground Workaround: If your yard is flat on one side but slopes or steps down significantly on the other, you can use standard frameless panels on the flat run. When you hit the sloped terrain or steps, transitioning to semi-frameless posts makes it significantly easier to safely “step” the glass panels down the hill while keeping the bottom gaps strictly under the 100mm legal limit.
⚠️ Critical Rules for a Successful Transition
If you decide to combine both styles in your layout, you must manage these key installation details to ensure the fence looks professional and remains structurally sound:
- The Glass Thickness Drop (Aligning the Face): Frameless glass panels are typically 12mm thick, whereas semi-frameless panels are usually 10mm or 8mm thick. If you run a frameless panel directly into a semi-frameless post, the glass face will sit at different depths. You must ensure your installer uses the correct internal rubber gaskets or packers inside the post channel to tightly grip the thinner glass while keeping the front faces of the panels visually flush.
- The Top-Line Realignment (The Datum Line): Because frameless glass relies on bottom spigots, the panels sit slightly higher off the ground to allow for water drainage. Semi-frameless panels slot into vertical posts that sit flat on the surface. When ordering your glass, your supplier must calculate the overall height so that the top edges of both systems form a perfectly level, continuous line across the transition. A sudden drop or stagger at the top look messy and uncoordinated.
- The Gate Placement Rule: Keep your self-closing gate assembly unified. It is highly recommended to build your gate entirely within one system (e.g., a frameless gate swinging off a frameless fixed panel) rather than trying to hang a heavy frameless glass gate directly off a semi-frameless post, as the mixed structural hardware tension can cause the gate to sag, jam, and fail compliance.
📊 System Profile: Frameless vs. Semi-Frameless Integration
| Project Section | Recommended System | Glass Thickness | Primary Benefit |
|---|---|---|---|
| Main Entertainment / Patio View | Fully Frameless | 12mm Toughened | Unobstructed, premium “floating” look |
| Side Garden / Lawn Runs | Semi-Frameless | 8mm or 10mm | Cost-effective, rigid wind resistance |
| Unreinforced Timber Decking | Semi-Frameless | 10mm | Spreads structural load across vertical posts |